Sparks Academy
SPARKS ACADEMY
Online Test Series
8190879379 Chennai

MCQ - Mechanical TNPSC JTO
JTO - 538 - Industrial Robotics and Digital Manufacturing - 538 - Unit V Run Operations with Teach Pendent Key Functions

1)   

What is a teach pendant in an industrial robot?

A.
B.
C.
D.
Answer: B
2)   

Which part of the teach pendant usually contains the emergency stop button?

A.
B.
C.
D.
Answer: B
3)   

The joystick or jog keys on the teach pendant are used for:

A.
B.
C.
D.
Answer: B
4)   

Which button on the front of the teach pendant is used to stop the robot in emergencies?

A.
B.
C.
D.
Answer: B
5)   

On most teach pendants, the “Enable” or “Deadman” switch is located on:

A.
B.
C.
D.
Answer: B
6)   

The display screen on the teach pendant is primarily used for:

A.
B.
C.
D.
Answer: B
7)   

Which of these functions is commonly on the back of the teach pendant?

A.
B.
C.
D.
Answer: B
8)   

The function of the deadman switch is to:

A.
B.
C.
D.
Answer: B
9)   

Which button is used to start program execution from the teach pendant?

A.
B.
C.
D.
Answer: B
10)   

If the deadman switch is released, the robot will:

A.
B.
C.
D.
Answer: B
11)   

Navigation keys on the teach pendant are mainly used for:

A.
B.
C.
D.
Answer: B
12)   

Which function is NOT found on the teach pendant?

A.
B.
C.
D.
Answer: B
13)   

The cycle stop button on the teach pendant is used to:

A.
B.
C.
D.
Answer: A
14)   

The pendant cable connects to the robot controller to:

A.
B.
C.
D.
Answer: B
15)   

A soft key on the teach pendant is:

A.
B.
C.
D.
Answer: B
16)   

The back side grip design of the teach pendant is meant to:

A.
B.
C.
D.
Answer: B
17)   

Which key combination on the pendant might be used for jogging in “Tool Coordinate” mode?

A.
B.
C.
D.
Answer: A
18)   

Why is the pendant designed with a lightweight casing?

A.
B.
C.
D.
Answer: B
19)   

What is the main purpose of the pendant’s back safety features?

A.
B.
C.
D.
Answer: B
20)   

When holding the teach pendant, which fingers typically operate the deadman switch?

A.
B.
C.
D.
Answer: B
21)   

What does the Tool Coordinate System define?

A.
B.
C.
D.
Answer: B
22)   

TCP stands for:

A.
B.
C.
D.
Answer: A
23)   

In the Tool Coordinate System, the Z-axis is usually aligned with:

A.
B.
C.
D.
Answer: A
24)   

Why is defining the Tool Coordinate System important?

A.
B.
C.
D.
Answer: B
25)   

When jogging in Tool Coordinate mode, motion is relative to:

A.
B.
C.
D.
Answer: B